Posted on 2/28/2017
There is no rule as to how long a strut assembly will last. The life will vary greatly based on vehicle make/model and driving area/habits. A good standard is 70,000 – 80,000 miles of driving before struts will require replacement. Strut replacement can be an expensive investment, Many times we have manufacturer coupons available to assist in the cost of repairs.#strut #coupon #shock
Posted on 2/28/2017
The main difference between a standard fuel injection system and "Gasoline Direct Injection" (GDI) engine is the placement of the fuel injector. A GDI fuel injector is located to spray fuel directly into the combustion chamber. Due to this design the fuel system operates under extremely high pressure with precise timing. A standard fuel injector is located in the intake manifold and the fuel travels past the intake valve into the combustion chamber. This design difference requires more frequent air induction service for GDI engines.#GDI #injector #engine
Posted on 2/28/2017
A power "steering rack" or "steering gear" is a rack gear and a pinion gear that transmits the steering wheel rotation inside of your car to tire movement outside of your car. Most modern steering racks have either a hydraulic pump for assist or electric motor for assist. The rack is connected to the outer steering mechanisms with tie rod ends.#steering #powersteeringrack #steeringgear
Posted on 2/16/2017
#waterpump #autorepair #coolingsystem Click Here to learn more!
Posted on 2/3/2017
The timing belt in your engine is a critical component. Replacement intervals vary by manufacturer from 60,000 miles to 105,000 miles. It is also critical to consider that the timing belt is made of rubber. Rubber degrades over time and regardless of mileage the belt should be replaced within 8 years of service.#timingbelt #belt #beltreplacement